Cleaning the Laminar Flow Hood is an important step to ensure that it continues to provide a high-quality clean environment. The following are detailed steps and precautions for cleaning the Laminar Flow Hood:
1. Preparation stage
Material preparation: Make sure you have the appropriate cleaning tools and materials, such as a new yellow towel, 75% alcohol, pure water, a large piece of gauze, and a strong flashlight. These materials will be used to clean the inside and outside of the Laminar Flow Hood.
Turn off the equipment: Before cleaning, make sure to turn off the power of the Laminar Flow Hood and disconnect it from any external equipment. This ensures that no equipment damage or personal injury will occur during the cleaning process.
2. External cleaning
Remove dust: First, use a yellow towel and pure water to clean the outside of the Laminar Flow Hood, starting from the top to the bottom to clean the dirt and dust. Make sure to thoroughly remove all visible dirt and dust.
Use disinfectant: Next, use gauze moistened with 75% alcohol to wipe the inside surface of the hood from the top to the bottom, starting from the top of the inside. This includes all visible parts such as the support frame, railings and the inner wall of the lid. Make sure to wring out the gauze thoroughly to ensure the sterilization effect.
3. Internal cleaning
Internal cleaning: Use a yellow towel and pure water to clean the inside of the Laminar Flow Hood from top to bottom. Special cleaning is done on the dead corners of the support frame to ensure that there is no residue. During the cleaning process, use a strong light flashlight to carefully observe the cleaning effect to ensure that no dirt or dust is missed.
Internal disinfection: Use gauze moistened with 75% alcohol to thoroughly disinfect the inside of the Laminar Flow Hood. Similarly, start from the top of the inside and wipe all surfaces from top to bottom. Make sure to wring out the gauze to ensure the sterilization effect.
4. Inspection and reopening
Check cleanliness: After cleaning and disinfection, use a strong light flashlight to check the internal cleanliness of the Laminar Flow Hood. Ensure that there is no visible dirt, dust or residue.
Restart the device: After confirming that the Laminar Flow Hood has been thoroughly cleaned and disinfected, reconnect the power supply and external devices and restart the device according to the manufacturer's guidelines.
5. Precautions
Follow the manufacturer's guidelines: When cleaning the Laminar Flow Hood, always follow the guidelines and recommendations provided by the manufacturer. This ensures that the device is properly cleaned and disinfected and avoids damage to the device.
Use appropriate cleaners and disinfectants: Select appropriate cleaners and disinfectants for cleaning and disinfection. Avoid using chemicals that may damage the device.
Regular cleaning: In order to ensure the continued performance of the Laminar Flow Hood, it is recommended to clean and disinfect it regularly. The specific cleaning frequency depends on the usage and the manufacturer's recommendations.
By following the above steps and precautions, the Laminar Flow Hood can be effectively cleaned and disinfected to ensure that it continues to provide a high-quality clean environment.
